Patch Cable - CAT6a - S/ftp - 5m - Grey

Introduction

The ACT S/FTP CAT6A datacenter slimline patch cables ensure a max. bandwidth of 500MHz (10Gbit). The patch cables have full copper 30 AWG wires and 50u gold-plated RJ45 contacts. All cables comply with international standards and are 100% tested.

CAT6A S/FTP slimline datacenter ethernet cables are smaller in diameter (4.5mm vs 5.9mm) than regular CAT6A patch cords.

The cables have a smaller bending radius in comparison with regular patch cords. This results in a better airflow in the server rack/network cabinet.

The application of a LSZH (Low Smoke Zero Halogen) cable jacket reduces the risk of high concentrations of toxic gases in case the cable is damaged due to fire or short circuit.

Although, ISO/IEC and TIA standards describe the use of patch cords between 22 and 28 AWG, it is possible to use 30 AWG patch cables. This results in a higher attenuation, particularly at higher frequencies.

Features

Product colour

Grey

Cable length

5 m

Cable standard

Cat6a

Cable shielding

S/FTP (S-STP)

Connector 1

RJ-45

Connector 2

RJ-45

Connector 1 gender

Male

Connector 2 gender

Male

Connector 1 form factor

Straight

Connector 2 form factor

Straight

Connector contacts plating

Gold

Connector shielding

Yes

Jacket material

Low smoke zero halogen (LSZH)

Cable shape

Round

Conductor material

Copper

Ethernet interface type

10 Gigabit Ethernet

Networking standards

IEEE 802.3at

AWG wire size

30

Data transfer rate

10000 Mbit/s

Frequency

500 MHz

Bend radius (min)

2.7 cm

Power over Ethernet (PoE)

Yes

Power over Ethernet (PoE) type supported

PoE+

Total Power over Ethernet (PoE) budget

30 W

Snagless cable boot

Yes

Operational conditions

Operating temperature (T-T)

-20 - 60 °C

Sustainability

Doesn't contain

Halogen

Certificates

Compliance certificates

CE

Weight & dimensions

Outer diameter

4.5 mm

Packaging content

Quantity per pack

1 pc(s)