Hard Drive - Ultrastar DC HC510 - 8TB - SATA 6Gb/s - 3.5in - 7200rpm - 512e format Pin3 ISE

Introduction

High Capacity – 10TB HDD, drop-in ready for mainstream enterprise
Low Power – 44% more efficient (Watts/TB) than air-filled drives
Most Reliable – Best-in-class reliability rating of 2.5M hours MTBF

Laying the foundation for a worry-free data center, HGST delivers an exceptional capacity hard drive in the industry – Ultrastar He10. Designed to handle workloads up to 550TB per year, the He10 uses PMR technology and is the industry’s first 10TB drive that is drop-in ready for any enterprise-capacity application or environment. Based on field proven, third-generation HelioSeal® technology, it offers the lowest power profile in the industry to help data center architects meet eco-environmental goals and requirements. Targeted at 2.5M hours MTBF, the He10 provides the highest reliability rating available of all HDDs on the market today by building on the successful design of its 8TB and 6TB predecessors. Trust HGST and Ultrastar He10 to deliver more capacity, more efficiency, more reliability and more value to your data center.

Features

HDD size

3.5"

HDD capacity

8000 GB

HDD speed

7200 RPM

Interface

Serial ATA III

Type

HDD

Storage drive buffer size

256 MB

HDD interface transfer rate

6 Gbit/s

HDD sustained transfer rate

215 MiB/s

Read seek time

8 ms

Write seek time

8.6 ms

Average latency

4.16 ms

Start/stop cycles

600000

Power

Power consumption (typical)

6.8 W

Power consumption (idle)

5 W

Operating voltage

5 / 12 V

Operational conditions

Operating temperature (T-T)

5 - 60 °C

Storage temperature (T-T)

-40 - 70 °C

Operating shock

70 G

Non-operating shock

300 G

Weight & dimensions

Width

101.6 mm

Height

26.1 mm

Depth

147 mm

Weight

660 g