10/100tx-100base Fx Wdm Fiber Converter 1550nm 20km

Introduction

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.

The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function

LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

Network

Maximum data transfer rate

100 Mbit/s

Converter input interface

100Base-TX

Converter output interface

100Base-FX

Networking standards

IEEE 802.3,IEEE 802.3u,IEEE 802.3x

Ethernet interface type

Fast Ethernet

Ethernet LAN data rates

10,100 Mbit/s

Flow control support

Y

Auto MDI/MDI-X

Y

Auto-negotiation

Y

Duplex system

Full, Half

Ports & interfaces

Connectivity technology

Wired

Ethernet LAN (RJ-45) ports

1

Fiber ports quantity

1

Fiber optic connector

SC

DC-in jack

Y

Performance

Maximum transfer distance

20000 m

Wavelength

1550 nm

Fiber mode structure

Single-mode

Tx power (min)

-14 dBmW

Tx power (max)

-8 dBmW

Sensitivity

-31 dBmW

Design

Internal

N

LED indicators

Y

Product colour

Black

Housing material

Metal

Certification

FCC Class A, CE Class A

Power

Input voltage

5 V

Input current

2 A

Weight & dimensions

Width

94 mm

Depth

70 mm

Height

26 mm

Weight

200 g

Operational conditions

Operating temperature (T-T)

0 - 50 °C

Storage temperature (T-T)

-40 - 70 °C

Operating relative humidity (H-H)

5 - 90%

Storage relative humidity (H-H)

5 - 90%